1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

What is a correct angle ??

Discussion in 'Fisher Engineering Discussion' started by snap1, Dec 23, 2009.

  1. snap1

    snap1 Junior Member
    Messages: 7

    I have a 04 f150 that i just put a mm2 7 1/2 Fisher plow on. the plow seemed to be at a good angle but then i added a ready lift block to the top of the front strut assembly. Now the plow seems a little too far forward due to the lifting of the front of the truck. How do you determine the exact correct angle ? i looked at fisher owners manual and i dont see a specific guideline for this. Thanks for the info. Happy Holidays to all
     
  2. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    The a-frame needs to be parallel with the ground. That way it will scrape consistently whether the blade is straight or angled.
     
  3. snap1

    snap1 Junior Member
    Messages: 7

    Thats what i thought but i wasnt sure if any forward angle was better for a good bite. Thanks