1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

What are the generic spec's on meyers power angle hose

Discussion in 'Meyer / Diamond Products Discussion' started by Earl W., Oct 1, 2007.

  1. Earl W.

    Earl W. Member
    Messages: 68

    are they standard hydraulic hose, say 3000psi? just wanted to know if a replacement was needed in a pinch
     
  2. SnoFarmer

    SnoFarmer PlowSite Fanatic
    from N,E. MN
    Messages: 8,604

    You can get a spare hose at any hydrlic shop or any plow dealer.

    It is a good idea to have spare hoses on hand before you need them.

    Make sure the new hose has the same psi ratting as the old one had or more.
    3000 psi is common.for our snow plows.

    use only steel braided hose not nylon.
     
  3. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Yes they're just a standard 1/4 in hydraulic hose thats available at most any hydraulic shop. And like Snofarmer mentioned, get the steel braided stuff. Use 3000psi minimum, but if you can find it 3500 or 4000psi is even better.
     
  4. Earl W.

    Earl W. Member
    Messages: 68

    Thanks for the info.