1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

WesternTornado continuously beeping

Discussion in 'Truck & Equipment Repair' started by wdwb1966, Jan 16, 2016.

  1. wdwb1966

    wdwb1966 Junior Member
    Messages: 1

    My controller has a continuous beep. I've determined that it is the 1 beep code repeating itself. I have checked at the module for voltage as well as continuity in the 2 18 gauge wires running from the controller to the module. Any suggestions
     
  2. Hysert

    Hysert PlowSite.com Addict
    Messages: 1,260

    It is a communication error.. 1 beep! It could be a controller issue? Misnick will provide insight forsure
     
  3. all ferris

    all ferris Senior Member
    Messages: 119

    If there are signals going into the module but nothing coming out then I would say you need a new module. did you say you have voltage at the conveyor and spinner posts on the module?
     
    Last edited: Jan 16, 2016
  4. bliz&hinikerDLR

    bliz&hinikerDLR Senior Member
    Messages: 471

    Did you check the 100 amp fuse under the hood?