1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

western v box side extensions

Discussion in 'Ice Management' started by kfd210, Nov 16, 2007.

  1. kfd210

    kfd210 Junior Member
    Messages: 12

    Do they make a bolt on side extensions? If so does anyone know were to get them? Thanks
     
  2. DuallySnoPusher

    DuallySnoPusher Senior Member
    Messages: 114

    I know that they make them for a Buyers vbox and im sure that they would work. They aren't cheap though!! You are better off getting some angle iron and a few 2x10's and save a ton of money.
     
  3. kfd210

    kfd210 Junior Member
    Messages: 12

    Thanks Dually.
     
  4. DuallySnoPusher

    DuallySnoPusher Senior Member
    Messages: 114

    I just finished mine if you are interested i will send you some pics.
     
  5. kfd210

    kfd210 Junior Member
    Messages: 12

    Sounds good Dually shoot them out when you have a chance. Thanks
     
  6. kfd210

    kfd210 Junior Member
    Messages: 12

    What size is the angle you use for the corners? Thanks for the pictures.
     
  7. DuallySnoPusher

    DuallySnoPusher Senior Member
    Messages: 114

    They are 3' angle iron, but if i were to do it again i would use 4'. I don't know if you can see it but i had to weld on a little 2 inch tab on one side so i had a little more to bolt the boards on to.