1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

western uniplow 7 1/2' proplow

Discussion in 'Western Plows Discussion' started by dan the man, May 11, 2015.

  1. dan the man

    dan the man Junior Member
    Messages: 4

    trying to get wiring harnesses for western snow plow. it has 11pin wiring on plow. can I use solenoids or do I need an isolation module. I don't which it should be. mounting on a 1997 chevy 1500 4x4 with h3 h4 headlights. 2 on each side.
     
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,973

    Does the plow have 2 connectors or 3? Let's start there
     
  3. dan the man

    dan the man Junior Member
    Messages: 4

    7 !/2 Western snopplow

    its a 3 plug mount
     
  4. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,973

    So the plow is set up for the Iso set-up.
    A Iso truckside setup will be a tad pricy.
    Relay harness setup would not be however, your calling it a unimount?
    So not sure what you really have.
     
  5. dan the man

    dan the man Junior Member
    Messages: 4

    7 1/2 ft snow plow

    yes it is a western unimount pro plow with 3 plug wiring 1 for power 1 for hydraulics and 1 for lights. owner said be sure to get 3 plug wiring harness. he runs western plows and has a snow removal service. this was an old plow
     
  6. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,973

    Ok. Then you need the Iso set-up. That's the module box. Start looking at the site sponcers for all the parts
     
  7. dan the man

    dan the man Junior Member
    Messages: 4

    thanks that helps a lot