1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Western unimount plow help!

Discussion in 'Truck & Equipment Repair' started by Wrobs101, Jan 30, 2016.

  1. Wrobs101

    Wrobs101 Junior Member
    Messages: 6

    With the blade all the way right I can push the blade to the left with little resistance. Can anyone help? thanks in advance.
     
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,958

    What brought this on?
     
  3. Wrobs101

    Wrobs101 Junior Member
    Messages: 6

    I was just doing some maintenance and noticed that I can move the blade while pushing on it but only when I push on the driver's side
     
  4. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,958

    Did you drain the fluid?
     
  5. Wrobs101

    Wrobs101 Junior Member
    Messages: 6

    I didn't, I did bleed the pistons because they had a little air in them.
     
  6. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,958

    I'd just run it a few times left to right and then check the fluid then see if it still does it.
     
  7. Wrobs101

    Wrobs101 Junior Member
    Messages: 6

    Could a valve be stuck open at little?
     
  8. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,958

    It could. Could also be the bypass valve