1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

western unimount anyone have one

Discussion in 'Western Plows Discussion' started by torence20, Aug 25, 2013.

  1. torence20

    torence20 Junior Member
    from dixon
    Messages: 14

    hey guys ive got a western unimount truck side mount. im going to make my conventional cable mount plow work with this set up, my question to all of you guys that have these is from the front to the back of the a-frame what is the measurement? i may have to shorten mine since i will attach my lift frame to my plow so it will work with my unimount. but i dont want my plow to be 8 ft away from the front of my truck. and i dont have a unimount plow to go off of.
     
  2. snowplowpro

    snowplowpro Senior Member
    from NJ
    Messages: 901

    ill measure mine tomorrow for ya check back in the am
     
  3. torence20

    torence20 Junior Member
    from dixon
    Messages: 14

    hey thanks i appreciate it alot!
     
  4. snowplowpro

    snowplowpro Senior Member
    from NJ
    Messages: 901

    not a problem
     
  5. snowplowpro

    snowplowpro Senior Member
    from NJ
    Messages: 901

    I got 31.5 from front to back :cool:
     
  6. torence20

    torence20 Junior Member
    from dixon
    Messages: 14

    is that the a frame alone, or is that from the front of the blade to the rear of the a frame ohh and thank you for doing that
     
  7. snowplowpro

    snowplowpro Senior Member
    from NJ
    Messages: 901

    the A frame from were the bolt goes in to the back of that angle iron piece
     
  8. torence20

    torence20 Junior Member
    from dixon
    Messages: 14

    ok thanks bud