1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Western uni mount plow not raising or angle left

Discussion in 'Truck & Equipment Repair' started by jdw728, Feb 9, 2010.

  1. jdw728

    jdw728 Junior Member
    Messages: 3

    I was plowing a drive today the inline fuse blew. I changed the fuse and now the plow will only angle right or lower. It wont raise or angle left. If you try to go left it goes right. If anyone has answers It would be a blessing I dont know anything about the Uni Mount plows. Thanks John
     
  2. no lead

    no lead PlowSite.com Addict
    Messages: 1,308

    sounds like s3 stuck shifted.
     
  3. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    I'd be more likely to suspect an electrical issue since it blew the fuse first. A short in the control harness/grill connector or controller for the S3 function. If you check for magnetism at the S3 coil you'll probably discover there isn't any.
     
  4. jdw728

    jdw728 Junior Member
    Messages: 3

    Hey guy's Thanks a bunch it was the S3 changed it it works great Thank you again
     
  5. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Better find out why it blew the fuse then.
     
  6. jdw728

    jdw728 Junior Member
    Messages: 3

    There was snow in the 9 pin