1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Western Pro Flo I Help needed

Discussion in 'Commercial Snow Removal' started by Birneyj, Mar 6, 2005.

  1. Birneyj

    Birneyj Junior Member
    Messages: 12

    I posted this in another location and recieved little response. If someone could some detailed pictures of the in bed mount for this spreader it would be greatly appreciated. I need to fabricate one to fit a spreader that I just bought.

    Thanks in Advance
    Jim
     
  2. mylittlescoop

    mylittlescoop Senior Member
    from nj
    Messages: 101

    Hello Bernie, I do not know if this will be much help for you but try this link it will give you the original installation instructions for the IN BED MOUNT with diagrams and pictures(I am pretty sure)
    Give this a try
    http://westernplows.com/techinfo.asp?cat=387
    you have to click on installation instructions just fool around with it and play with the links the information you may be seeking is more detailed than a picture some one may send you

    Here is the one your looking for!
    http://westernplows.com/pdf/13666_110098.pdf
     
    Last edited: Mar 6, 2005
  3. Birneyj

    Birneyj Junior Member
    Messages: 12

    Thanks much...

    That is just what I was looking for.
     
  4. mylittlescoop

    mylittlescoop Senior Member
    from nj
    Messages: 101

    No problem....Best of luck to you :)