1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Western 9' V blade

Discussion in 'Western Plows Discussion' started by LucasPaving, Feb 1, 2015.

  1. LucasPaving

    LucasPaving Junior Member
    Messages: 20

    Blade goes into scoop but when you press the up button, instead of the blade going up it goes into the v formation, right wing button works left one controls the right wing as well instead of the left, checked wiring all good, checked solenoid, all good swapped out for new anyways. Swapped out the module same issues, last is the joystick? Probably the issue?
     
  2. mishnick

    mishnick 2000 Club Member
    Messages: 2,243

    Is this an MVP+? There are fuses under the black cover on the + but not on the regular MVP. The four fuses control various sets of valves. If one fuse is blown the plow will do strange things as you describe. Pull both covers off and look for the two fuses in the black plastic sockets, they have four wires going to each but the fuses are covered so some people don't realize what they are.

    If the fuses are all good on the plow try another controller. It could also be the plow module, again if it is a +. The last thing I would be looking for, after verifying all the above, would be a bad valve.