1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Western 7'6 straight to 7'6 MVP?

Discussion in 'Ram Trucks' started by beb, Feb 27, 2011.

  1. beb

    beb Junior Member
    Messages: 20

    I own a 1998 Dodge ram 1500. (I know its not recommended to plow with a dodge 1/2 ton) That's beside the point. My truck does not have daylight running lights and single headlights per side not dual. I have a western 7'6" steel pro plow on it now with the hand-held cab controller. I have heard different feedback on what wiring harness I would need to convert my truck over to the uni-mount 7'6" MVP? I know the cab hand-held controller would need to change but not sure on the wiring? Thanks Brian
     
  2. slongfellowii

    slongfellowii Senior Member
    Messages: 157

    You will need the MVP 12 pin wiring harness, MVP power cable and controller. You should be able to use the same headlight harness.
     
  3. beb

    beb Junior Member
    Messages: 20

    Do you know the western part number of the wire harness I would need?