1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Western 7'6" Steel Pro Plow

Discussion in 'Used Plowing and Truck Equipment Forum' started by NCat496, Feb 12, 2010.

  1. NCat496

    NCat496 Senior Member
    Messages: 353

    I am selling this for one of the guys I sub with. Western 7'6" Steel Pro Plow. The moldboard was bought 2/2009 and used until this last week. The a-frame, angle rams, and springs are 4 years old. He purchased a complete brand new 7'6" and it was too small for the truck and he just upgraded to a 8'6" moldboard but kept the new a-frame and just swapped moldboards. There is a few dents on the left side from curbs/guard rails. This plow is in great shape, and no cracks on the moldboard. The a-frame has some paint peeling but it seems to be in good shape otherwise.

    Included in sale:
    -7'6" Moldboard
    -A-frame
    -4 springs
    -deflector
    -Backdrag edge
    -anything else you see in the pictures.

    $700.00 OBO

    Any questions just ask.
     
    Last edited: Dec 26, 2012
  2. NCat496

    NCat496 Senior Member
    Messages: 353

    More pics of the plow
     
    Last edited: Dec 26, 2012
  3. NCat496

    NCat496 Senior Member
    Messages: 353

    more pics of the plow
     
    Last edited: Dec 26, 2012
  4. NCat496

    NCat496 Senior Member
    Messages: 353

    need to get rid of this
     
  5. D&S snowplowing

    D&S snowplowing Member
    Messages: 40

    Where are you located at im very interested
     
  6. NCat496

    NCat496 Senior Member
    Messages: 353

    cleveland ohio
     
  7. D&S snowplowing

    D&S snowplowing Member
    Messages: 40

    Alright im up in st joseph michigan
     
  8. NCat496

    NCat496 Senior Member
    Messages: 353

    not sure where that is in michigan, are you still interested?
     
  9. D&S snowplowing

    D&S snowplowing Member
    Messages: 40

    Yes i am but the only problem im looking a 6hr drive or so...are all the piviot points on it in good condition and its off an ultra mount right?
     
  10. NCat496

    NCat496 Senior Member
    Messages: 353

    All pivot points are good, new bolts from a-frame to mold board. And yes it is off an Ultra-Mount system.
     
  11. JScudes

    JScudes Junior Member
    Messages: 4

    Hey whats going on. just to let you know thats my old plow. The a frame was not mine...but everything works as far as i know. I was in st. joseph this past summer and it is about 6 hours. what you see is what you get. i take good care of the equipment so the edge, mold board, and snow deflector is in great shape. i hope we can work anything out...thanks!
     
  12. NCat496

    NCat496 Senior Member
    Messages: 353

    bump bump bump
     
  13. JScudes

    JScudes Junior Member
    Messages: 4

    only 700 bucks obo...its a deal!!! let me know if you are interested!!
     
  14. NCat496

    NCat496 Senior Member
    Messages: 353

    No one wants this?
     
  15. NCat496

    NCat496 Senior Member
    Messages: 353

    bump need to sell
     
  16. suzuki0702

    suzuki0702 Senior Member
    Messages: 649

    whats up with the duct tape on the rams?
     
  17. NCat496

    NCat496 Senior Member
    Messages: 353

    thats where the hydrolic hoses would go into the rams, just put it in there so nothing would get in there.
     
  18. Western1

    Western1 Senior Member
    from MI.
    Messages: 677

    Sent you a PM let me know,Thanks.
     
  19. NCat496

    NCat496 Senior Member
    Messages: 353

    just did hope it works out
     
  20. NCat496

    NCat496 Senior Member
    Messages: 353

    Need to sell this