1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Wanted: Used Meyer Mount for "78 Bronco

Discussion in 'Meyer / Diamond Products Discussion' started by 84928s4fun, Sep 21, 2009.

  1. 84928s4fun

    84928s4fun Junior Member
    Messages: 1

    :help: We recently purchased a Meyer plow set up from EBay, however the mount is for a Dodge.

    We want to put the plow on our 1978 Ford Bronco. We can't afford to buy a new mount so we are hoping someone has a used one for sale, or trade for the Dodge Mount.

    We live in Northern AZ, and we only have a month before the snow flies!
    Any ideas we would be greatly appreciated!

    ussmileyflag

    Thanks,
    Greg & April
     
  2. Nascar24

    Nascar24 Senior Member
    Messages: 645

    Hi

    If you can't find one or if it is too expensive, I'd take the mount and the Bronco down to a good local welding shop. I'd have them refab it to fit, shouldn't take more than a few hours. Whatever they do make sure they bolt it onto the frame and not weld it, use grade 5 bolts and lock nuts. If you go to Meyers website you may even find a diagram of what you need under mounts or in the Archive, it may give the fabricator some ideas on how to retrofit the Dodge mount to fit the Ford.

    Good Luck!