1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Wanted,Fisher pushplates

Discussion in 'Used Plowing and Truck Equipment Forum' started by 79F350, Nov 16, 2006.

  1. 79F350

    79F350 Junior Member
    Messages: 0

    I know it's a long shot but I am hoping somebody can help me.

    I am looking for pushplates and pushbeam for a 78/79 F250 for a Fisher plow setup.
    I also need the crank pully for a Ford 351m/400,to run the pump.

    Thanks in advance,John
     
  2. Ding

    Ding Member
    Messages: 62

    Minute Mount or Conventional?
     
  3. 79F350

    79F350 Junior Member
    Messages: 0

    For a conventional.Sorry I forgot to put that in....
     
  4. Ding

    Ding Member
    Messages: 62

    Sorry man, I didn't check earlier but pushplates and headgear that might have fit yours just sold today on ebay.

    Conventional Mount on Ebay

    You might also try . . .

    Crysteel Truck Equip.
    Minneapolis, MN
    763-571-1902
    Ask for Jim, I know he has lots of old stuff

    Tucks Trucks
    Hudson, MA
    978-562-3492
    Ask for Bob Camacho.
     
  5. 79F350

    79F350 Junior Member
    Messages: 0

    Ding,Thanks,I actually won that auction.Should be here on Mon.

    Thanks again,John
     
  6. Ding

    Ding Member
    Messages: 62

    Great, Good Luck with it !!!