1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

VXT question

Discussion in 'Boss Plows Discussion' started by ByDesign, Nov 18, 2012.

  1. ByDesign

    ByDesign Senior Member
    Messages: 373

    I have an 02 f350 reg cab 6 speed 4x4 dually and when the plow is down, it seems that the entire cutting edge wont contact the concrete in all positions. Is there an adjustment that I can do to play with it a bit. I would have thought they would have done this from the dealer. :confused: Im sure if I was to look in the manual I could find the answer, but I left that at the shop.

    Thanks in advance,

    ByDesign
     
  2. IC-Smoke

    IC-Smoke Senior Member
    Messages: 672

  3. ByDesign

    ByDesign Senior Member
    Messages: 373

    We have only had a dusting, so kinda hard to tell if the edge will level out a bit. Would make sense for it to move 1/2"?

    This is my first V, so im not sure on a few things. I could go back, but if it is something easy I would rather mess with it myself.

    ByDesign