1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

V2 center pin

Discussion in 'Meyer / Diamond Products Discussion' started by jb1390, Nov 19, 2011.

  1. jb1390

    jb1390 Senior Member
    Messages: 710

    Just got a new v2 8.5, and I am assembling it myself. The center pin that I got doesn't reach all the way to the bottom of the a frame. Is this correct, our did they give me the wrong box with too short of a center pin? There are three holes on tge a frame that I think it should go through, it only reaches tge top two.
  2. SkiJohnnyB

    SkiJohnnyB Member
    Messages: 54

    If you are talking about the pin that goes through the hinge of the V, mine goes through the bottom of the A frame and sticks out about a 1/4 inch
  3. jb1390

    jb1390 Senior Member
    Messages: 710

    Thanks johnny, turns out they sent me the wrong pin, it should be set up like yours is.