1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

V plow for the ATV

Discussion in 'ATV / UTV Snow Removal' started by The Swede, May 26, 2008.

  1. The Swede

    The Swede Member
    from Sweden
    Messages: 80

    Here is the plow we built in Sweden for the ATV its controlled with hi pressure air and it.s working werry well.
    We put on a salt spreader on it to.

    IMG_6380.jpg
     
  2. banksl&s

    banksl&s Member
    Messages: 46

    Looks good. What runs the high pressure air? Do you have a onboard air tank or a compressor? Also what kind of ATV is that? How about some more pics?
     
  3. The Swede

    The Swede Member
    from Sweden
    Messages: 80

    Its a 12 volt air compressure and we dont use a tank beacuse then the hot air will frezze in the tank. i will fix more pictures later.
     
  4. The Swede

    The Swede Member
    from Sweden
    Messages: 80

    The ATV is a Linhai 520 V-twin
     
  5. Pirsch

    Pirsch Senior Member
    Messages: 596

    What's Werry well??? No worrys just messing with you. Welcome aboard and that's a GREAT looking ATV... makes alot of them over here look like junk!
     
  6. The Swede

    The Swede Member
    from Sweden
    Messages: 80

    Little more pictures of it.

    IMG_0740.jpg

    IMG_0747.jpg

    IMG_0746.jpg

    IMG_0752.jpg

    IMG_0762.jpg
     
  7. Pirsch

    Pirsch Senior Member
    Messages: 596

    Oh that's Sweet!
     
  8. iceyman

    iceyman 2000 Club Member
    Messages: 2,546

    if you can drop ship that bad boy then my truck has already been sold:D awesome lookin machine and nice snoway:salute::nod:wesport
     
  9. The Swede

    The Swede Member
    from Sweden
    Messages: 80

    It´s nice plow and spreader. The benefit with this plow is that you can put a pressure on the plow aginst the ground.
     
  10. elite1msmith

    elite1msmith 2000 Club Member
    from chicago
    Messages: 2,762

    has this unit plowed snow yet? or just welded? looks sweet, but u said its air driven? so then what keeps the blade in the scope position, is the pressure high enough , to hold back the weight of the snow from pushing the blade back, ?
     
  11. The Swede

    The Swede Member
    from Sweden
    Messages: 80

    When we tested it we had no problem with it.
    The air pressure is loding 8 bar.