1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Used Plow Questions,,What do I need

Discussion in 'Fisher Engineering Discussion' started by GSORK, Feb 21, 2006.

  1. GSORK

    GSORK Senior Member
    Messages: 128

    I Might want to put a plow on my truck.What parts do I need
    1-Plow .Some type of minute mount.
    2-Frame that mounts on truck.
    3-Isolation Module,,What does this do??
    4- Joystick or hand controler.
    Is there anything else I need as far as Major parts?
    Thanks
     
  2. Antnee77

    Antnee77 PlowSite.com Addict
    from RI
    Messages: 1,056

    Well you need the whole plow setup itself, a set of push-plates (mounting brackets) for the truck, and a wiring harness. If you get a MM2 or a late model MM1 with Insta-Act hydraulics, the wiring harness needs to include an isolation module. The wiring consists of power, headlight wiring, and control. You can find everything you'll need for your particular truck on Fisher's site, under 'plow selection', using their eMatch service.