1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Urgent, Problem with Saber Lights

Discussion in 'Truck & Equipment Repair' started by KaTooM12503, Feb 11, 2006.

  1. KaTooM12503

    KaTooM12503 Junior Member
    Messages: 3

    Just decided to hook up the plow lights last night for the first real snow in my area. Every thing works fine, but my left head light the low beam will not work. Also, the plow low beam will not work either. Was wondering how i could fix this. The modules are brand new so i don't think they should be the problem. Any advice would be appreciated
     
  2. Young Pup

    Young Pup PlowSite Fanatic
    Messages: 5,491

    Does the truck low beam work before plugging in the plow plug? If so it just sounds like you might have corrosion on the plow plugs. Put dielectric grease on it and put together and unplugs a few times. Should remove the corosion. Also if you want after they work you can use some zip ties to keep the plugs tight and this will help keep a good connection. Hope this helps.

    JP
     
  3. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    Did you check the truck fuses? If they are good check the adaptors.