1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

upfitter switches

Discussion in 'Ford Trucks' started by richsoucie, Dec 14, 2005.

  1. richsoucie

    richsoucie Member
    Messages: 89

    how would i go about using one of the upfitter switches to change between the plow lights and the head lights
  2. framer1901

    framer1901 Senior Member
    Messages: 805

    The Boss harness uses a switch to go from truck to plow lights, it activates a relay. I figured out which wire the switch made hot (both same color) and hook that to one of the outfitter switches, 1 and 2 are 30 amp, 3 and 4 are 10amp - depending on how your plow harness is, it might matter which switch you should use.
  3. richsoucie

    richsoucie Member
    Messages: 89

    i figured it out my switch was the six prong kind so i just added a relay and hooked that up to the switch. I used aux 3 it is 10amp
  4. Eyesell

    Eyesell 2000 Club Member
    Messages: 2,101

    Speaking of upfitter, does anyone know how to make them HOT all the time ??