1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

unimount mvp

Discussion in 'Western Plows Discussion' started by hamm8232, Jan 5, 2013.

  1. hamm8232

    hamm8232 Junior Member
    Messages: 23

  2. #1 plowtech

    #1 plowtech Senior Member
    Messages: 253

    In addition to your vehicle harness that you have listed you will also need
    the truckside battery cable #66623. (it has 2 large pins and 1 small)
    The light harness you have will work. If you dont have the mvp controller
    you can use your straight blade controller w/ adaptor 66760k
    for straight blade functions only

    did som recon:

    www.snowplowpartswarehouse.com 66623 $73.00
    66610 $172.00

    www.centralpartswarehouse.com 66623 $80.00
    66610 $187.00

    i try to purchase and support from our sponsors first then go
    elsewere if needed. I dont believe the place you have listed is a sponsor.

    Well good luck!
     
    Last edited: Jan 6, 2013
  3. hamm8232

    hamm8232 Junior Member
    Messages: 23

    Thanks for the info. I found that site and liked the discription of the item and the links to install and wiring diagrams. I will prob order from one you listed. Like central parts but there discriptions of these items were not very good
     
  4. hamm8232

    hamm8232 Junior Member
    Messages: 23

    I also found 64085 kit to change to 3 plug for $240 or is this not the way
     
  5. #1 plowtech

    #1 plowtech Senior Member
    Messages: 253

    A 64085 is a complete wiring kit (w/o power or battery cable).
    You said you have the light harness?

    If you dont have it for your vehicle a kit would be the better way to go.
    It list for 329.00., 240 is a great deal IF its new.
     
  6. hamm8232

    hamm8232 Junior Member
    Messages: 23

    Is there any way to to tell what year my plow is?
     
  7. #1 plowtech

    #1 plowtech Senior Member
    Messages: 253

    pm me your serial# of the hydraulic unit
     
  8. hamm8232

    hamm8232 Junior Member
    Messages: 23

    What does the thirrd small wire do and were would it go on 66623
     
  9. #1 plowtech

    #1 plowtech Senior Member
    Messages: 253

    its located in between the 2 large pins on your electrical plug at the grill on plow and truck.
    it is molded into it.
    What does it do? Its called a low side drive system. The low side provides live 12 volts to all the coils and relay. When you activate your controller you close the ground path to make the plow function.
    So when you have to diagnose the problem, you have to put your test leads the opposite way.
    + to -
    - to +, fun right. The bottom line, install the correct cables and make it right. Good luck, PT
     
  10. hamm8232

    hamm8232 Junior Member
    Messages: 23

    I ordered the 66610 and 66623 today so should be simple,
    thanks for your help