1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Uni_Mount Problem

Discussion in 'Truck & Equipment Repair' started by wheeler4x4, Dec 21, 2008.

  1. wheeler4x4

    wheeler4x4 Member
    Messages: 38

    I have an issue w/ Uni-Mount. It only clicks at the solenoid when I try to move it. No up-down or left -right. I tried a known working controller out of another truck. Same thing, no change. I've checked all the connections, everything seems to be tight. Could it be a bad solenoid? It was working great then nothing. What am I missing? Thanks for any and all help in advance
  2. sechracer

    sechracer Senior Member
    Messages: 478

    Jump the posts of the solonoid. If the pump motor runs, bad solonoid.
  3. econolinerick

    econolinerick Junior Member
    Messages: 15

    Also jump from battery to both sides of the solenoid, then you'll know if the battery cable or connection is faulty. After those steps try jumping direct from the battery to the motor. If motor runs it's somewhere between.
  4. wheeler4x4

    wheeler4x4 Member
    Messages: 38

    Just wanted to say thanks for the pointers on the solenoid. Works like champ now