1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Uni-mount mount differences

Discussion in 'Western Plows Discussion' started by 7879fordplower, Oct 12, 2009.

  1. 7879fordplower

    7879fordplower Member
    Messages: 49

    What are all the differences in the mounts for a 8.6 mvp and a 9.6 mvp for a 99 k2500. The 9.6 plow doesn't have much ground clearance on my truck and I set the lower pin hole at the western spec. so I'm now thinking there might be a deference int the mounts. Any insight would be helpful. Thanks.
     
  2. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    Nope, only one mount. Dont think the 9-6 is recommended for that truck, might be time for a torsion bar adjustment and or load boosters and some ballast.
     
  3. 7879fordplower

    7879fordplower Member
    Messages: 49

    when i measured the drop in the wheel well it only drops an inch. the holes in the link arms are larger in diameter the the holes in the mount.