1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

uni-mount acting strange

Discussion in 'Western Plows Discussion' started by rofoth6, Dec 28, 2012.

  1. rofoth6

    rofoth6 Member
    from iowa
    Messages: 67

    plow lifted up,but won't go down. angle to the right it will go left a little before go'ing right. have the joystick controler motor runs in all positions ( up right left ) . it just won't go down
  2. snowplowpro

    snowplowpro Senior Member
    from NJ
    Messages: 900

    The valve is probably clogged or bad its stopping the fluid from enter/exiting which releases the pressure
    change it or take it out and clean it with parts or Carb cleaner.
  3. rofoth6

    rofoth6 Member
    from iowa
    Messages: 67

    valve was the problem. I broke the elbow on the angle cylinder. I drilled and tapped the hole out but forgot to flush the system out.Small piece of steel shaving in the 4 way valve.