1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Underhood belt pump bearing size

Discussion in 'Fisher Engineering Discussion' started by Nigel Tufnel, Dec 16, 2013.

  1. Nigel Tufnel

    Nigel Tufnel Junior Member
    Messages: 5

    Hi Everyone,

    The pump on my speedcast finally took a dive over the weekend. Based on the oil smell I'm getting in the cab of truck and outside of it as well as the lack of pressure, I've narrowed it down to a bad seal on the pump drive which I plan on replacing in the comming days. But, while I have it open I also want to replace the bearing on the shaft. I've been looking all over the web to see if I could find a part number for this bearing, might anyone on here know the p/n or even the size bearing. The few times I've posted, everyone here has been very helpful. Thanks,

    I've included two pictures of the truck for reference.

    February Blizzard 2013.jpg

    Truck Tappen Beach 2013.jpg