1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

???????Under Hood Solenoid???????

Discussion in 'Western Plows Discussion' started by ddsprint, Dec 4, 2008.

  1. ddsprint

    ddsprint Junior Member
    Messages: 3

    Got confused with the solenoid, have one that is stuck open, change to a new one and it doesn't seem to work with switch, although when I take a wrench and go to the battery side and jump to switch it works, what is the deal where am I lost,

    Correct me if I'm wrong, but when you move the controller it grounds the switch and makes it click over to the other side, I can't get the light wire to light up when the switch is grounded,

    So I'm a little lost any help would be greatly appreciated, thanx alot
    dan
     
  2. sechracer

    sechracer Senior Member
    Messages: 478

    Yes they work on a ground system, where did you get the new one?
     
  3. Philbilly2

    Philbilly2 2000 Club Member
    Messages: 2,556

    sounds to me like the ground is no good on the solinoid, or the solinoid is no good all togther. when you it the controler, you should hear the solinoid click.