1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Ultramount help in swct

Discussion in 'Western Plows Discussion' started by PLOWMAN45, Nov 8, 2009.

  1. PLOWMAN45

    PLOWMAN45 2000 Club Member
    Messages: 2,830

    Anyone have knowledge about ultramount 2008 snowplow it wont go on the reciever and the motor runs it has fluid im in sw ct i can call if you have suggestions
     
  2. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    Yeah, more info!!!

    Wont go on the receiver, Chains to tight?

    its runs when, on its own, when you hit the controller, does it move one way only?
     
  3. Camden

    Camden PlowSite Fanatic
    Messages: 6,598

    Pull your truck up to the plow and stop just before you're about to make contact. Get out and check to see what the problem is...either the plow will be too high, too low or crooked. Using blocks make the necessary adjustments so that it's lined up better.

    Be sure not to put yourself into a position where the light bar will fall forward because you'll just create more problems.

    As far as the plow not operating, you need to give a lot more details on that.
     
  4. PLOWMAN45

    PLOWMAN45 2000 Club Member
    Messages: 2,830

    i had the reciever brackects on wrong now everything is working a friend came out does anyone use those dollys