1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Turn signals oppisite

Discussion in 'Fisher Engineering Discussion' started by zrain25, Oct 25, 2013.

  1. zrain25

    zrain25 Member
    Messages: 43

    Wired up my truck for a 8ft mm2. Everything works fine except the turn signals. When I put on my left turn the Trucks left turns blink and the right turn for the plow blinks. Turn on right tur signal. The trucks signals go right plow signal go left.

    So basically my plow turn signals do the oppisite side there sappose to do.

    Truck is a 99 f350 I'm guessing it's just one of the wires I spliced to the turn signals ?
     
  2. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,677

    there is a small 2 prong plug, think blue and green wire, flip it.
     
  3. zrain25

    zrain25 Member
    Messages: 43

    Where the plug ?
     
  4. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,677

    Should be near the module under the hood.
     
  5. 2006Sierra1500

    2006Sierra1500 PlowSite.com Addict
    Messages: 1,758

    Lets confirm this first..are the lights on the plow on correctly? With turn signals on the outside?
     
  6. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,535

    Haha, I remember a post from 5 years about the guy with the light on wrong!
     
  7. haytown3

    haytown3 Junior Member
    from ontario
    Messages: 4

    Easy fix unplug lights and switch sides
     
  8. Mr.Markus

    Mr.Markus PlowSite Fanatic
    Messages: 5,170

    It's getting too late to fix it, just plow with your hazards on.........
     
  9. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,535

    He's got a few minutes. Run Forest run.
     
  10. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,975

    Huh. So the lights know there on the wrong side?
     
  11. haytown3

    haytown3 Junior Member
    from ontario
    Messages: 4

    Take the wire that plugs into the light on the right side and plug it into light on the left side and the wires on the left light plug into the right side problem fixed not to big of a deal
     
  12. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,677

    Seriously guys? He may believe you.

    plow1.jpg
     
  13. buddymanzpop

    buddymanzpop Senior Member
    Messages: 601

    crossed up

    If it's a 3 plug isolation module unplug plugs "B" and "C" at the isolation module and plug them back into the opposite ports you originally had them in. If it's a 4 port isolation module unplug wires "3" and "4" from the module and swap their positions when you plug them back in.