1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Turn signal 2000 f250

Discussion in 'Ford Trucks' started by cfdeng7, Sep 30, 2009.

  1. cfdeng7

    cfdeng7 Senior Member
    from CT
    Messages: 376

    hey guys
    I have an 2000 f250 and the front turn signal is burned out, I know i have to take the adjusters out for the head light to access the turn signals but anyone have any tips for me before i start? just trying to make it as easy as possible.

    Thanks Guys
     
  2. No you dont, this is a snap to do. There are 2 phillip screws under the lens above the bumper, just take those out and pull the lens out, and then just change the bulb.

    Have fun this year
     
  3. mvhauler

    mvhauler Senior Member
    Messages: 170

    There are 2 plastic alignment studs (tits) on the turn signal assembly. You may have to be a little forceful to pop the assembly out, making sure, of course, not to break them.
     
  4. cfdeng7

    cfdeng7 Senior Member
    from CT
    Messages: 376

    thanks alot guys. i was told i would have to take the headlight out thanks