1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Truck side mount for a VMD

Discussion in 'SnowDogg Snow Plows' started by NTO, Jan 11, 2016.

  1. NTO

    NTO Junior Member
    Messages: 26

    Good Morning Gang

    I have a VMD on my 2013 GMC Sierra 2500HD and noticed that the tabs on the truck mount are starting to bend down. I've heated them up and bent them back up, but now they are going back down again. I've seen a different mount somewhere that had a whole lot more steel on it. Here is my mount number:

    16062165A

    Any help would be appreciated.

    Bob
    NTO
     
  2. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,530

    Once you have heated them, they've lost strength unless you've properly cooled them. They'll continue to bend.
     
  3. NTO

    NTO Junior Member
    Messages: 26

    I know, but at the time, it'a all I could do to get the plow back to normal position. I thought it was a pretty poor design to have a 700#+ hanging off the front of a truck.Clean design, just should be a little beefier.
     
  4. CARDOCTOR

    CARDOCTOR PlowSite.com Addict
    Messages: 1,310

    let s see some pics