1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Trip spring install...

Discussion in 'Meyer / Diamond Products Discussion' started by Foxfire, Nov 11, 2011.

  1. Foxfire

    Foxfire Senior Member
    Messages: 153

    Hi guys, I just bought 3 new trip springs for my 7.6 ST, cant seem to get them on...as I remember there is a trick to it but I just cant remember it...any help would be great...Thanks !!!
     
  2. fordsuvparts

    fordsuvparts Senior Member
    Messages: 135

    Push the top of the blade back , I used some 6x6 blocks up against a telephone pole
     
  3. Stan

    Stan Senior Member
    Messages: 579

    Thread the lower lock nut as far down as possible. Hook each spring on the frame. Lift each spring individually through the mold board and catch a couple of threads on each one as you proceed to the next. When you do the fist, pry back a little for the next and so on. Adjust to specs.