1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Trip-Edge replacement or Sledge Hammer fix

Discussion in 'Introduce Yourself to the Community' started by bishop1011, Dec 14, 2009.

  1. bishop1011

    bishop1011 Junior Member
    Messages: 1

    I have an older 6.5" minute mount plow which I plow a 6-10 driveways. A fisher dealer put a new cutting edge on and now I have a 2" gap across the center of the plow between the edge and the ground. this isn't good bcz it will leave a snow burm.

    The trip edge is bent a little on each end. part costs approx $350+$150install. I already spent $250 on the cutting edge and don't want to put more into an old plow.

    Q.) could I just slege hammer both ends back to somewhat normal and use it that way.
    has anyone tried something like this? is it possible?
     
  2. thesnowman269

    thesnowman269 Senior Member
    Messages: 949

    Maybe post some pictures of your problem? might be able to help you then
     
  3. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Pics would be good. $250 USD for a 6.5 cutting edge? Steel?