1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

tower leaning forward

Discussion in 'Boss Plows Discussion' started by GA73, Feb 13, 2014.

  1. GA73

    GA73 Member
    Messages: 90

    broke my a frame on my rt3 v blade. after replacing the a frame my light tower is leaning forward quite a bit.
    any ideas why and how to fix it
    thanks
     
  2. DuramaxLML-42

    DuramaxLML-42 Senior Member
    Messages: 258

    Check your frame mounts. Thats the only thing that that tower is connected to that would effect the angle of the tower. You may have bent something more than just your A frame.
     
  3. grandview

    grandview PlowSite Fanatic
    Messages: 14,609

    Make sure it hooked up.
     
  4. GA73

    GA73 Member
    Messages: 90

    have 2 other plows and they ride right on the truck.
     
  5. alldayrj

    alldayrj PlowSite.com Addict
    Messages: 1,097

    Look where the blade pins to the light tower, you probably bent it
     
  6. GA73

    GA73 Member
    Messages: 90

    nothing bent but there was some wear on the pins. also a lot of wear on the pins that set on the bottom of the mount on the truck frame
    gonna try some new pins and weld and build up the mount pins