1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Touchpad is constantly on now

Discussion in 'Meyer / Diamond Products Discussion' started by pushinsno, Dec 3, 2009.

  1. pushinsno

    pushinsno Member
    Messages: 69

    I wired the wire hareness corectly from the plow on back and and put the power wire into the fuse panel that has pwr when the truck is on but for some reason my controller is on as soon as i plug it in, any solutions or reasons why this would be doing this
     
  2. SnowLane

    SnowLane Senior Member
    Messages: 125

    This scenario will happen if the harnesses orange wire with the large eyelet (next to white wire with small eyelet) is hooked up to power. The orange wire is a ground.
     
  3. pushinsno

    pushinsno Member
    Messages: 69

    okay no prob it is hooked to the negative side of the battery terminal like its supposed to and the white wire to the solenoid so i dont understand why it is constantly on
     
  4. SnowLane

    SnowLane Senior Member
    Messages: 125

    It sounds like the touch pad is shorted.