1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

TORO 38674 PowerMax HD Chute Turning On Its Own

Discussion in 'Truck & Equipment Repair' started by fordtruck661, Feb 21, 2015.

  1. fordtruck661

    fordtruck661 Senior Member
    from CT
    Messages: 404

    I was snow blowing today with my TORO 38674 PowerMax HD and the chute turns on its own when turned all the way left. This is with the new "Chute Control Quick Stick". I am really hoping I just need to adjust something. I have not really looked at it much.

    826.QuickStick-0209.jpg
     
  2. fordtruck661

    fordtruck661 Senior Member
    from CT
    Messages: 404

    Bump this back to the top.

    No One has had this Problem??? I must just be the unlucky SOB. :realmad:
     
  3. fordtruck661

    fordtruck661 Senior Member
    from CT
    Messages: 404

    Ok so I just went out and was able to fix it.

    The problem was under the cover just behind the chute. Just had to take the cover off and then adjust the the wire that has the sprocket that hold the chute in place (picture #2) and tighten the bolt to hold the wire in place (picture #1)

    IMG_0889.jpg

    IMG_0890.jpg
     
    Last edited: Feb 28, 2015