1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Tornado spreader module no spinner output

Discussion in 'Ice Management' started by skrambler, Oct 30, 2015.

  1. skrambler

    skrambler Junior Member
    Messages: 1

    Spinner post has no output, replaced module lasted about ten loads, same problem. Replaced module under warranty and replaced spinner motor by recommendation, module spinner output again went away. Put both spinner and conveyer connections together on conveyor post so we could use the unit and it worked without a problem, we didn't have the control but the conveyor post never lost power. Any ideas?

    MIDTOWNPC PlowSite Veteran
    Messages: 4,425

  3. Mr.Markus

    Mr.Markus PlowSite Fanatic
    Messages: 5,107

    The modules are very sensitive to surges. A lot of guys including seasoned mechanics hook power to the control harness to check motor functions without disconnecting the module which is usually a fatal mistake for the module.