1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

TJ mount pic?

Discussion in 'Jeeps' started by kabong57, Nov 25, 2010.

  1. kabong57

    kabong57 Junior Member
    from IL
    Messages: 15

    Would like to see pics of factory or modified mounts on a TJ. At least something that shows which mounting holes to use. Thanks Steve
     
  2. theplowmeister

    theplowmeister 2000 Club Member
    from MA
    Messages: 2,549

    mount for what brand of plow?
     
  3. kabong57

    kabong57 Junior Member
    from IL
    Messages: 15

    Really does not matter as I am going to modify a 3pin Sno-Way mount off of a Ford truck to fit my TJ. Thanks Steve
     
  4. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

  5. theplowmeister

    theplowmeister 2000 Club Member
    from MA
    Messages: 2,549

    Sorry, you want to know what bolt holes on the Jeep frame to use.

    the 2 bolts going into the frame (one is behind the sway bar) are the stock location. However the holes originally only go through the outer side of the box frame. I drilled through the inner side of the box frame and inserted tube (welded in) for the bolt to go through so when I tightened the bolt it would not crush the frame.

    see pic below
    [​IMG]

    I made a long bar that goes from the front of the plow mount to just in front of the control arm.
    I welded a 3/16 plate to the bottom of the Jeep frame (prevent the bolts from tearing through the frame.

    [​IMG]