1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Tgs 07 problem

Discussion in 'SnowDogg Snow Plows' started by Hegartydirtwork, Jan 4, 2015.

  1. Hegartydirtwork

    Hegartydirtwork Senior Member
    Messages: 118

    Tgs07 spinner moves back and forth very slow then stops, controller speed blinks than clicks to h code. Read the codes looks like I'll be checking wire harnesses for shorts, any other input?
     
  2. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,712

    Check bearing on the auger.
     
  3. Hegartydirtwork

    Hegartydirtwork Senior Member
    Messages: 118

    I got some time to check power today, I have 3 volts at the connector on the back of my truck on the spinner power wire. Also 3 volts off the controller, the vibrator power wire was running 12 volts off the controller and at the back of the truck.
     
  4. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,712

    What do you have at power coming into box?
     
  5. Hegartydirtwork

    Hegartydirtwork Senior Member
    Messages: 118

    I had 12 volts, but I am not sure what I should have going out because of the variable speed controller