1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Switching controllers

Discussion in 'Meyer / Diamond Products Discussion' started by smok531, Oct 26, 2012.

  1. smok531

    smok531 Junior Member
    Messages: 20

  2. mpriester

    mpriester Senior Member
    Messages: 404

    Give the gentleman at Smithbros. a call and tell him what your doing and he will tell you what you need.
     
  3. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Yes you can do it. You'll have to make the harness from the new plug to the switch from scratch though, which is what I would do, but you'll need the schematics to do it since of course you'll have no wiring on the switch side to "match up" as you referred to.
     
  4. smok531

    smok531 Junior Member
    Messages: 20

  5. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Yep that'll work. You'll have an extra wire in the truck side harness, which will be a ground the touch pad needed but other than that you're good to go.