1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Swing away salter

Discussion in 'Used Plowing and Truck Equipment Forum' started by dodgeboy06, Dec 2, 2012.

  1. dodgeboy06

    dodgeboy06 Member
    Messages: 42

    I have a used swing away salter that I am looking to sell, unfortunatly it is only the part that swings, no truckside brackets or wiring/controller. I did hook up 12 volts to it and it runs fine. Asking $750.00

    Salter.jpg

    Salter side.jpg
     
  2. dodgeboy06

    dodgeboy06 Member
    Messages: 42

    Willing to entertain reasonable offers....
     
  3. dodgeboy06

    dodgeboy06 Member
    Messages: 42

    Still available....
     
  4. ImpressPlowing

    ImpressPlowing Member
    from NYC
    Messages: 58

    What's your lowest?
     
  5. dodgeboy06

    dodgeboy06 Member
    Messages: 42

    $675.00.......
     
  6. dodgeboy06

    dodgeboy06 Member
    Messages: 42

    Still open to reasonable offers
     
  7. dodgeboy06

    dodgeboy06 Member
    Messages: 42

    Update, I have found a wiring harness and control for the salter....
     
  8. dodgeboy06

    dodgeboy06 Member
    Messages: 42

    Spring bump still available
     
  9. dodgeboy06

    dodgeboy06 Member
    Messages: 42

    Would like to move this out of my garage.
     
  10. hansenslawncare

    hansenslawncare Senior Member
    Messages: 300

    Where in WI are you?
     
  11. dodgeboy06

    dodgeboy06 Member
    Messages: 42

    Near Lake Geneva
     
  12. dodgeboy06

    dodgeboy06 Member
    Messages: 42

    Weekend bump
     
  13. dodgeboy06

    dodgeboy06 Member
    Messages: 42

    October bump any interest out there at all?
     
  14. hauler1000

    hauler1000 Junior Member
    Messages: 22

    Are you willing to ship to CT 06851?
     
  15. dodgeboy06

    dodgeboy06 Member
    Messages: 42

    Bump to the top
     
  16. Glenn Lawn Care

    Glenn Lawn Care Senior Member
    Messages: 552

    So you have all the parts and it works fine? I'm pretty interested.
     
  17. dodgeboy06

    dodgeboy06 Member
    Messages: 42

    I have everything EXCEPT the plates that bolt to the truck, there are 2 that go on the bumper and 2 that bolt to the top of the bed rails. Unfortunately those were left on the truck when it was sold, otherwise I have a complete wireing harness and controller for it yes. As far as I know it still works properly, I did hook up the motor to a battery and it spun just fine.
     
  18. dodgeboy06

    dodgeboy06 Member
    Messages: 42

    Back to the top again......would like to move this
     
  19. Zr2berger

    Zr2berger Junior Member
    Messages: 0

    How much now?
     
  20. dodgeboy06

    dodgeboy06 Member
    Messages: 42

    $600.00 obo