1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

swapping hub help

Discussion in 'Ford Trucks' started by plowzilla, Feb 6, 2009.

  1. plowzilla

    plowzilla Senior Member
    Messages: 289

    I would like to install the Warn manual locking hubs for my automatic/manual ford 2002 F250 hubs. Is this a staight swap out or do I need to add a kit? Thank you in advance for any help.
     
  2. bluerage94

    bluerage94 Senior Member
    Messages: 398

    I replaced the hubs on my 2002 Excursion with the warn preminums a while back. Its was about 5 minutes per hub, easy.
     
  3. LawnProLandscapes

    LawnProLandscapes PlowSite.com Addict
    Messages: 1,129

    no kit needed just swap em
     
  4. EaTmYtAiLpIpEs

    EaTmYtAiLpIpEs 2000 Club Member
    Messages: 2,607

    take the old ones out. and put the new ones on.
     
  5. Ggg6

    Ggg6 Senior Member
    from IL
    Messages: 521

    The OBS trucks need the kit, the SD does not. IIRC you will need snap ring pliers to remove the phenolic washers and snap ring from the stub shaft. The instructions will tell you. All in all a very easy job.
     
  6. hydro_37

    hydro_37 PlowSite Veteran
    from iowa
    Messages: 3,790

    Easy to do and very well worth it.