1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

sub frame on a meyer

Discussion in 'Commercial Snow Removal' started by ram4x443015, Feb 26, 2008.

  1. ram4x443015

    ram4x443015 Senior Member
    Messages: 138

    i have a 2007 dodge ram 2500 and made a sub frame off a 94-97 dodge to fit it but it is to low to the ground dose any one have one and can tell me how high it is i have the ex mount tube sub frame to thanks jim
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    You want one of the pin attaching holes to be approx 10 1/2" from the ground, preferably the middle one.

    Doing it this way will allow you one hole of up and down adjustment, since the ultimate goal is to get it wherever it needs to be to get the A-frame parallel with the ground in the first place..