1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

stumped with e-60 just clicks when pressed touch paad

Discussion in 'Meyer / Diamond Products Discussion' started by andrewlawnrangr, Feb 19, 2011.

  1. andrewlawnrangr

    andrewlawnrangr Senior Member
    Messages: 339

    ok the seloniod just clicks when the touch pad is touched. started by installing a new seloniod, still just clicks. checked ground from pump and baterie to truck. checked fuild level in pump thats good, bench tested motor and thats works fine, so what do i do next?
    andrew
     
  2. rocklandls

    rocklandls Junior Member
    Messages: 14

    Sounds like the Solenoid ground is bad.
     
  3. nightwalks

    nightwalks Member
    Messages: 37

    If your getting clicking with each button press, then power seems to be going to the solenoid, are your positive in/out connections good? Are you getting constatnt B+ at the IN ternimal and B+ OUT when you press any button? If so, something is bad at the motor. B+ at the motor when pressed? You have to trace out all of your connections for power. (and ground).
     
  4. goel

    goel PlowSite.com Addict
    Messages: 1,079

    In line fuse check?