1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Stuck angle rams

Discussion in 'Commercial Snow Removal' started by Sandbrew, Jan 8, 2007.

  1. Sandbrew

    Sandbrew Member
    Messages: 38

    Hello all just looking for a little help.

    After the big snows I had to disassemble my Western 6.5 SUV plow to get the A-Frame welded and now the angle rams are both extended to far for me to drop the pivot bolt back into place.

    Is there a way to release the pressure in both rams so I can push the entire plow back 2-3 inches?


  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Loosen the hose fitting's at the ram's and tap the rear of the ram's with a soft face hammer.
  3. Sandbrew

    Sandbrew Member
    Messages: 38

    Thanks, I got it back on and was able to plow a few wind blown in drives tonight. Sandbrew