1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

strobe light configuration help

Discussion in 'Strobe Lighting' started by mass1589, Feb 3, 2013.

  1. mass1589

    mass1589 Senior Member
    from mass
    Messages: 338

    im interested in purchasing two strobe beacons for the top of a back rack. my plan is to run them permanantly into a 12v source with the switch directly on the plug.

    im interested in buying the 35 dollar setup by a member on the site in the for sale section.

    he has the ecco 6410 beacon light amber.

    can someone verify they can be wired together in this setup....and also how to do it the proper way?

    thanks for the help
     
  2. RBRONKEMA GHTFD

    RBRONKEMA GHTFD 2000 Club Member
    Messages: 2,592

    Without having a actual strobe power supply no unless they are led and have the ability to sync together. I am not bashing what that guy has for sale but you should look into whelens led beacons. They are very bright, syncable and all the MDOT trucks have them.
     
  3. chuckraduenz

    chuckraduenz Senior Member
    Messages: 345

    the beacons your looking at are not sync able. they are strobe.

    you can run them off of 12v run to each light.