1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Strobe Help

Discussion in 'Strobe Lighting' started by sully853, Dec 21, 2011.

  1. sully853

    sully853 Junior Member
    Messages: 21

    Hey guys I have a galls responder and am looking to perminently wire it to my truck. My one problem is the light is currently wired to a cig lighter plug that has both an on off switch and a switch to change the light pattern. inside the cig plug theres three colors or wire red black and white. I have read that the white wire is to change the patterns and was just wondering where i would connect this wire as i will be running power to the battery with a a switch and an inline fuse. Thanks for the help
     
  2. dieseltech

    dieseltech Senior Member
    Messages: 273

    The pattern wire needs a momentary groung to change the patterns
     
  3. sully853

    sully853 Junior Member
    Messages: 21

    sorry but could you explain that for me?
     
  4. dieseltech

    dieseltech Senior Member
    Messages: 273

    Th pattern wire gets grounded momentarily to chang the pattern. You will need two switches one to turn the bar on...hot wire and a ground. The other a ground and the pattern wire
     
  5. H&HPropertyMait

    H&HPropertyMait Senior Member
    Messages: 558

    Exactly what he said