1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Straight Blade to V-Blade

Discussion in 'Fisher Engineering Discussion' started by ch973934, May 13, 2008.

  1. ch973934

    ch973934 Senior Member
    Messages: 132

    Looking at a truck with 8 ft. HD that is just beat up from weathering and not being very-well maintained (sitting outside during the off-season with little-to-no maintenance). I have a chance to pick up an older Fisher MM. They are both MM and I was just wondering what exactly I would have to do to change over from a straight to a V.

    Thanks guys.

  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    You'll more than likely need to change most/all of the truck side wiring depending on the exacts, but you can reuse the mount with the Vee.
  3. nobletousha13

    nobletousha13 Senior Member
    from VA
    Messages: 124

    -yeah your right about the wiring
    -dont forget about the CHEAP controller too