1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

straight blade angle cylinders

Discussion in 'Boss Plows Discussion' started by duraplow, Dec 10, 2013.

  1. duraplow

    duraplow Member
    Messages: 77

    I have a 8'6" super duty straight blade,somehow got a hairline crack in passenger side cylinder. The part # is HYD07014 but no luck finding any. Anyone know of an updated part number for theses? Thank you
     
  2. BOSS_JG

    BOSS_JG Senior Member
    Messages: 194

    The updated part number is HYD08830.
     
  3. duraplow

    duraplow Member
    Messages: 77

    Thank you! I have a few HYD09731 cylinders at the shop, will these work on this plow as well?
     
  4. BOSS_JG

    BOSS_JG Senior Member
    Messages: 194

    The difference between the HYD08830 and the HYD09731 is the location of the hose fitting. The 8830's have a hose fitting that is located on the side of the cylinder body. You install a 90 deg fitting into the cylinder which connects to the angle hose. This gives clearance between the hose and the pushframe mounts.

    The 9731's have a fitting that is on the top of the cylinder, and you connect the angle hose directly into the cylinder.

    You can use the 9731's, but you will have to notch the pushframe mounts to allow clearance for the hose.

    If you have additional questions you can reach our factory service technicians at 800-286-4155 ext. 2.