1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Storing E47 Pump for the summer

Discussion in 'Meyer / Diamond Products Discussion' started by wsmm, May 7, 2011.

  1. wsmm

    wsmm Member
    Messages: 80

    What is the recommended way to store the E47 pump assembly after it is removed from the vehicle for the season, with the ram totally extended or fully retracted.
  2. wva

    wva Member
    Messages: 78

    hi I store my e60 retracted with a light coating of grease on thr exposed shaft to prevent pitting not sure if its right or wrong hope that helps
  3. tjctransport

    tjctransport PlowSite.com Addict
    Messages: 1,390

    always store with piston fully retracted, and exposed part oiled. also, store standing up like it is mounted on the truck. laying it on it's side will let oil leak out and may dry out seals.
  4. cpmi

    cpmi Senior Member
    from CT
    Messages: 162

    When the Electro Lift® unit is not used for extended
    periods, protect the chromed lift rod (Ram) by fully
    extending it and coating it with chassis lubricant. Full
    extension of the lift rod (Ram) fills the cylinder with
    hydraulic fluid. On Power Angling models, coat the
    exposed portions of the Power Angling cylinder rods
    (Rams) with chassis lubricant to protect them against
    rust and corrosion.
    Copied from Meyer service manual-