1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

STARTERS

Discussion in 'Chevy Trucks' started by LEN EBERLE, Feb 12, 2000.

  1. LEN EBERLE

    LEN EBERLE Junior Member
    Messages: 1

    I PUT A REMANUFACTURED JASPER ENGINE IN TRUCK<br>NEW FLYWHEEL ALSO. I HAVE HAD THE ENGINE IN SINCE NOV 98. I HAVE WENT THROUGH PROBABLY 25 STARTERS. I HAVE TOOK MY TRUCK TO SEVERAL MECHS. NOBODY CAN FIX IT. I HAVE BEEN TOLD IT COULD BE THE WRONG FLYWHEEL. POSSIBLE? I HAVE BEEN TOLD BENT CRANK SHAFT.POSSIBLE? I NEED HELP PLEASE?
     
  2. plowking35

    plowking35 2000 Club Member
    from SE CT
    Messages: 2,923

    What happens to your starters?? Do they make a high pitch squeel when engaged? Or do they just die after a short time of use??<br>If it squeels try a shim to get a better alignment with the teeth of the flywheel. If you have a auto tranny it is actually called a flex plate, as flywheels are only used in manual trannies.<br>If it is just wearing out very soon, with a hard turning over engine,check the following.<br>1- good ground and positive connections, they are the #1 reason for starter failure<br>check the engine to chassis and engine to cab grounds, clean to bare metel if needed<br>2- good baterry is a must, low cranking voltage is #2 killer of starters<br>3- engine timing, an engine to far advanced will cause very hard starting<br>4- if you have headers,try relocating your solenoid to the firewall, excessive heat from the headers may be frying the solenoid<br>Dino<p>----------<br> Professional Ice and Snow Management <br>Products:Services:Equipment www.sima.org
     
  3. Abe

    Abe Member
    Messages: 49

    only a thought here.....<p>I had a car that went thru about 1 starter a month, had it into the mechanic since i could not find the problem<p>I was purchasing a lifetime warranty starter from a national chain auto house<p>I was buying starters remanufactured outside the US,, <p>When the mechanic said he couldnt find anything wrong, I went to NAPA and bought a NEW starter, not remanufactured, been in the car now for about 6 yrs with out any problems<p>-abe<br>
     
  4. frahmie

    frahmie Junior Member
    Messages: 23

    i have had the same problem with started. I figured out that it was due to higher compresion, which causes the starters to weaken. i went threw a starter a week until i bought a high torque, gear reduction starter and i haven`t had a problem since. stock starters just can`t handle the the harder turning of high compression motors. <p>frahmie
     
  5. ChucksChevyPages

    ChucksChevyPages Guest
    Messages: 0

    Heat does kill the solenoids. Not to say that some brands are better than others, but ...<br>A friend had a 74 Impala. Was eating starters like crazy. Car had a 454 in it. He knew it was heat, because after idling a while, and shutting it off, it wouldn't crank. Let it cool, and it cranked fine. Being a mechanic, when an Old Caddy came in with a big block, he snagged the heat shield off the starter. Never had trouble again, I just changed my starter recently. It was about a year old. Hi Temp, or so the decal on it said. I think letting the truck idle while plowing produces more heat, and helps fry the solenoid. GM should have put them on the fender or firewall like Ford and Dodge.<p>~Chuck<p>----------<br>Chuck's Chevy Truck Pages - Snowplowing Central<br>http://members.aol.com/csmith669/plowcentral.html
     
  6. Captkaos

    Captkaos PlowSite.com Veteran
    Messages: 55

    If it is a remanufactured starter, this is your problem. They alway cause problems with starting. Shimming a reman won't help. Take it back and get a good new one.<p>----------<br>Chris Lucas<br>http://www.wwisp.com/~captkaos